Serving the Buffalo area  ·  (716) 261-3070  ·  Open Mon-Sun 7am-7pm
📞 (716) 261-3070 Free Quote

Metal Roofing in Buffalo, NY (14203) · Local Professionals

Buffalo Metal Roofing · Fast response in Buffalo and the Buffalo area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Buffalo is a city of sturdy old houses and hard winters, and your roof has to handle both. From the Queen Anne Victorians in Allentown to the doubles in Black Rock and Kaisertown, and from the brick capes in Parkside to the post-war ranches out in Cheektowaga, every neighborhood here has its own roof story. Lake-effect snow, ice dams, and wind off Lake Erie don't care about charm; they test every seam and fastener.

That's why homeowners in 14203 and across Buffalo call Buffalo Metal Roofing. We've been climbing ladders here since 2009, and we know how a roof behaves after a Snowvember or a December blizzard. Whether you're near the Buffalo Niagara Medical Campus or out by Delaware Park, we'll give you a straight answer and a metal roof that sheds snow instead of hoarding it.

Metal Roofing in Buffalo (14203)

Buffalo sits at the eastern end of Lake Erie, where the Niagara River begins, and the terrain rolls over the Onondaga and Niagara escarpments. That means steep driveways, tight side yards, and older homes with layers of roofing that have seen a century of freeze-thaw cycles. In Allentown and the Elmwood Village, you're often working on Italianate and Queen Anne roofs with complicated hips and valleys, and in Black Rock or Riverside, the frame workers' cottages and doubles have low-slope porches that need careful flashing. Out in Amherst, Clarence, and Orchard Park, the newer two-story homes and big farmhouses take the full force of lake-effect snow, so standing seam and snow guards are common requests. We've seen ice dams at the eaves on high-elevation homes from South Buffalo to the Southtowns, and we've replaced plenty of fasteners that backed out after a windstorm.

Our team has been serving Buffalo and the surrounding areas since 2009, and we're a Metal Roofing Alliance member. We're fully insured with general liability and workers' compensation, so you're covered from the first inspection to the final walkthrough.

Our services in Buffalo

How a Job Works in Buffalo

Step 1: You call us at (716) 261-3070 or request a free estimate online. We'll schedule an on-site assessment, and we'll look at your roof the way a Buffalo roofer should: checking for ice dam damage, separated seams, and wind-lifted panels. We'll also talk through your options, whether that's a repair, a retrofit over shingles, or a full replacement.

Step 2: Once you approve the scope, we pull the required permits through the local building department and coordinate any historic district or HOA review. On tight city lots in Allentown or the Elmwood Village, we plan material drops and staging so we don't block your neighbors. Then our crew gets to work, installing your new metal roof or making the repair, with attention to flashing, ventilation, and snow guards where needed.

Step 3: We clean up every day and do a final walkthrough with you. We magnet-sweep for nails, haul away old materials, and make sure you know how your new roof works. We leave your property clean and your roof ready for the next Buffalo winter.

Pricing for metal roofing in Buffalo depends on the size and pitch of your roof, access, the condition of the decking, and how soon you need it done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. Snow guards and ice protection start at $1,200. We'll give you a written estimate after a free inspection, and we'll explain what's driving the cost. Call (716) 261-3070 to schedule.

✅ Metal Roofing Alliance Member, licensed and insured for work in Buffalo and nearby areas.

My Victorian in Allentown has a steep slate roof with ice dams every winter. Can a metal roof help?
Yes. Metal roofs shed snow much better than slate or asphalt, especially when paired with snow guards and proper ice-and-water shield at the eaves. We'll inspect your roof and recommend a standing seam profile that suits the historic look, and we'll coordinate with any historic district requirements.
A storm just peeled back some panels on my roof in South Buffalo. How fast can you respond?
We offer free storm and wind damage inspections and prioritize active leaks and wind damage. Call us at (716) 261-3070, and we'll schedule an inspection as soon as possible, often the same day or next. We'll document the damage for your insurance claim and make temporary repairs if needed.
What does a typical metal roof replacement cost for a 1,500 square foot house in Cheektowaga?
Most replacements fall between $9 and $12 per square foot installed, so a 1,500 square foot roof might run roughly $13,500 to $18,000 depending on pitch, access, and whether we remove the old shingles. We'll give you a precise quote after a free inspection.
Do I need a permit for a metal roof in Buffalo, and how do I find out?
Permits are commonly required for a full replacement or re-roof, and rules vary by jurisdiction. We recommend checking with the City of Buffalo website for general information, and we'll handle the permit application and inspections with the local building department as part of your project.
My neighbor's tree drops limbs on my roof, and we're not sure where the property line is. Can you help with insurance and HOA approval?
We can document the damage and provide a detailed estimate for your insurance claim, but we don't get involved in property line disputes. If your home is in an HOA, we'll help you prepare the design review submittal with panel profiles and colors that meet the guidelines.
Are you insured for roofing work on my Buffalo property?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide a certificate of insurance before work begins.
What maintenance does a metal roof need in Buffalo's climate?
Check fasteners and seals annually, especially after winter, and keep gutters clear of snow and debris. We offer inspections and maintenance plans to catch loose screws or flashing issues before they become leaks. Snow guards are also a good idea if you have walkways or doors below the eaves.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Buffalo

All your work handled by qualified professionals in Buffalo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Buffalo

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Buffalo · Response within 24h · No commitment · ☎ (716) 261-3070

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Buffalo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm