Serving the Buffalo area  ·  (716) 261-3070  ·  Open Mon-Sun 7am-7pm
📞 (716) 261-3070 Free Quote

Metal Roofing in Lewiston, NY (14092) · Local Professionals

Buffalo Metal Roofing · Fast response in Lewiston and the Buffalo area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Lewiston is a village of older homes where the lake effect snow and freeze-thaw cycles hit hard, and the housing stock shows it. Many of the houses around Center Street and the Ridge Road corridor date back to the 1800s, with steep pitches and dormers that leak first at chimneys and sidewalls. If you live in 14092, you already know that winter here tests every roof, and metal is one of the few materials that holds up to it.

Buffalo Metal Roofing has been installing and repairing metal roofs across Western New York since 2009, and we know Lewiston's specific challenges. From the historic homes near the Niagara River to the newer builds off Model City Road, we've seen how ice dams form at the eaves and how wind off the escarpment loosens fasteners. We're a Metal Roofing Alliance member and fully insured, and we treat every Lewiston property like it's in our own backyard.

Metal Roofing in Lewiston (14092)

Lewiston sits where the Niagara Escarpment meets the river, and that terrain shapes how roofs are built and repaired. The village has a mix of tight lots near the historic district and larger properties out toward Ridge Road, and many homes have steep roofs with multiple gables and dormers. Those dormers and chimneys are the first places to leak when snow sits and refreezes. We see a lot of ice damming on the north-facing slopes, especially on older homes with inadequate insulation, and we often recommend snow guards to keep ice from sliding off and damaging gutters or landscaping. The freeze-thaw cycles here also work screws loose on metal roofs, so we check fasteners and seams during every inspection. Whether it's a Victorian near the Earl W. Brydges Artpark or a ranch off Lewiston Road, we tailor the approach to the roof's pitch, access, and age.

Our team has been serving Lewiston and the Buffalo area since 2009, and we've worked on everything from standing seam installations on new construction to leak repairs on hundred-year-old homes. We understand the local building department requirements and can help you navigate permits when needed.

Our services in Lewiston

How a Job Works in Lewiston

Step 1: It starts with a call to (716) 261-3070 or a request through our website. We'll schedule a free on-site assessment at your Lewiston home, where we inspect the roof, check for leaks, and discuss your options. We'll give you a written estimate and answer any questions about materials, timelines, and permits.

Step 2: Once you approve the estimate, we schedule the work. For many Lewiston homes, that means coordinating with the local building department for permits, especially in the historic district where design review may apply. We also plan for tight lot access and protect your landscaping. Our crews are fully insured and follow manufacturer specs for installation, whether it's a full replacement or a retrofit over existing shingles.

Step 3: After the work is done, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you're satisfied. We don't consider a job finished until you're happy with the result and your property is left clean.

Pricing for metal roofing in Lewiston depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that local codes limit the number of layers. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a precise estimate tailored to your Lewiston home, call us at (716) 261-3070. We'll assess your roof and give you a clear, no-obligation quote.

✅ Metal Roofing Alliance Member, licensed and insured for work in Lewiston and nearby areas.

My Lewiston home has a steep roof with dormers, and I've had leaks around the chimney. Can you fix that without replacing the whole roof?
Yes, we specialize in leak repair and flashing work. Dormers and chimneys are common leak points in Lewiston's older homes, especially where snow sits and refreezes. We can repair the flashing, replace failed sealant, and address any damaged panels or shingles. If the leak is due to ice damming, we may also recommend adding snow guards or improving ventilation to prevent future issues. We'll inspect the area and give you a straightforward repair plan.
A storm just blew through Lewiston and lifted some panels on my metal roof. How quickly can you respond?
We offer free inspections for storm and wind damage, and we prioritize emergency repairs. Call us at (716) 261-3070 as soon as possible, and we'll schedule a visit to secure the roof and prevent further damage. Our team is experienced with wind-lifted panels and can often make temporary repairs the same day if needed.
What's the typical cost for a metal roof replacement on a 1,500-square-foot ranch in Lewiston?
For a ranch of that size, a basic metal roof replacement might start around $9 per square foot, but the total depends on the material, roof pitch, and whether any structural repairs are needed. We recommend a free estimate so we can measure your roof and discuss options. Give us a call at (716) 261-3070 to set that up.
Do I need a permit for a metal roof installation in Lewiston, and can you help with that?
Roofing permits are typically required for a full replacement or re-roof in Lewiston, and requirements can vary. We're familiar with the local building department and can guide you through the process. For specific rules, it's best to check with the town or village officials; you can start with the Niagara County website for contact information. We'll make sure the work meets code.
My neighbor and I share a property line, and I'm worried about the roof overhang. How do you handle that?
Property line issues are common in older Lewiston neighborhoods. We'll review your property survey and discuss the roof design to ensure we stay within your boundaries. If an HOA is involved, we can provide documentation and coordinate approvals. We always aim to avoid disputes and keep the project smooth.
Are you fully insured for roofing work in Lewiston?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. We're happy to provide certificates of insurance upon request, so you can have peace of mind knowing your property and our workers are protected.
What maintenance should I do on my metal roof in Lewiston to prepare for winter?
Before winter, we recommend clearing debris from gutters and valleys, checking fasteners for tightness, and inspecting seams and flashing for wear. If you have snow guards, make sure they're secure. We offer inspections and maintenance services to help you avoid ice dams and leaks. Call us at (716) 261-3070 to schedule a fall checkup.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Buffalo

All your work handled by qualified professionals in Buffalo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Buffalo

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Buffalo · Response within 24h · No commitment · ☎ (716) 261-3070

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Buffalo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm