Serving the Buffalo area  ·  (716) 261-3070  ·  Open Mon-Sun 7am-7pm
📞 (716) 261-3070 Free Quote

Metal Roofing in Tonawanda, NY (14150) · Local Professionals

Buffalo Metal Roofing · Fast response in Tonawanda and the Buffalo area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Tonawanda is a city of older homes where the roof takes a beating every winter. From the frame doubles and workers' cottages near the canal to the post-war ranches off Niagara Street, most of these roofs were built for a climate that has only gotten harsher, with lake-effect snow and freeze-thaw cycles that find every weak seam.

We are Buffalo Metal Roofing, and since 2009 we have been installing, repairing, and replacing metal roofs across Tonawanda and the surrounding Buffalo area. Homeowners in 14150 call us because we understand the specific problems here: ice dams at the eaves, meltwater working into aging shingles during the spring thaw, and wind off the Niagara River that can lift a poorly fastened panel. We are a Metal Roofing Alliance member and fully insured, and we treat every Tonawanda property like it is in our own neighborhood.

Metal Roofing in Tonawanda (14150)

Tonawanda sits at the junction of the Niagara River and Tonawanda Creek, and that location means something for your roof. The ground here is a mix of older clay soils and fill near the water, so drainage away from the foundation matters as much as what happens on top of the house. Many properties in the older sections have narrow side yards and detached garages close to the property line, which makes staging materials and accessing the roof a careful operation. We plan for that before we show up. The housing stock ranges from late 1800s Victorians near the canal to 1920s brick homes and mid-century capes, and each one has its own quirks: skip sheathing on the oldest roofs, shallow roof pitches on porches, and chimneys that need proper flashing details. We have seen how ice dams form on the north-facing slopes along streets like Delaware and Kohler, and we know that a metal roof over shingles, done right, can solve that for good. Our team has been working on Tonawanda roofs since 2009, and we bring that experience to every estimate.

Our experience serving Tonawanda and the Buffalo area, since 2009.

Our services in Tonawanda

How a Job Works in Tonawanda

Step 1: You call us at (716) 261-3070 or request a free estimate online. We schedule a time to walk your property, inspect the roof from the ground and on top, and talk through what you are seeing. We check the attic if accessible, look for signs of ice damming, and measure the roof so the estimate is accurate. You get a written proposal with options, not a high-pressure sales pitch.

Step 2: Once you approve, we handle the permit paperwork with the City of Tonawanda and coordinate any inspections. On the scheduled day, our crew arrives with materials and protects your landscaping and driveway. On tighter lots, we use a conveyor or careful staging to avoid damage. If your home is in a historic district or has HOA rules, we help you choose a panel profile and color that will pass review. We keep you informed at every stage, and we do not leave your roof open to the weather overnight.

Step 3: When the work is done, we clean up thoroughly. We magnet-sweep the yard for nails, haul away old materials, and walk the finished roof with you. We do not consider the job complete until you are satisfied and understand how to care for your new metal roof.

Pricing for metal roofing in Tonawanda depends on the size and pitch of your roof, the condition of the existing shingles, access around the house, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot, though local code limits how many layers you can cover. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer metal roof coating from $2.50 per square foot, which can extend the life of an older metal roof. For a precise number, call us at (716) 261-3070 for a free estimate. We will give you a clear, written price with no surprises.

✅ Metal Roofing Alliance Member, licensed and insured for work in Tonawanda and nearby areas.

My house in Tonawanda has ice dams every winter. Will a metal roof stop that?
Ice dams form when heat escapes through the roof and melts snow, which refreezes at the cold eaves. A metal roof with proper underlayment and ventilation greatly reduces the risk, but the real fix is addressing insulation and air sealing in your attic. We inspect your whole roof system and recommend the right combination, including snow guards if needed, so you are not dealing with ice dams year after year.
A storm just lifted some shingles and I see a leak. How fast can you get to my Tonawanda home?
We prioritize storm and wind damage calls. Call us at (716) 261-3070 and we will schedule an inspection as soon as possible, often the same day or next. We can tarp the area to prevent further water damage and provide a written estimate for permanent repairs.
What is the typical cost for a metal roof on a 1,500 square foot ranch in Tonawanda?
For a ranch that size, a basic corrugated or ribbed panel roof might start around $8,000 to $12,000, while standing seam could run $15,000 to $20,000 or more. The exact price depends on roof complexity, removal of old shingles, and material choice. We give free estimates with detailed line items.
Do I need a permit to replace my roof in Tonawanda, and how do I get one?
Yes, the City of Tonawanda generally requires a permit for a full roof replacement or re-roof. Requirements can vary, so it is best to check with the city directly. You can start at the City of Tonawanda official website through Erie County for contact information and general rules. We handle the permit application and inspections for you as part of the job.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We design the roof and gutters to direct water away from your foundation and respect property lines. If there is a concern, we can review the survey and adjust downspout locations. For HOA communities, we help you submit the required design approval before ordering materials.
Are you fully insured for work on my Tonawanda property?
Yes, we carry general liability insurance and workers' compensation coverage. We are happy to provide certificates of insurance before we start any work on your property.
What maintenance does a metal roof need in Tonawanda's climate?
Metal roofs are low maintenance, but in our climate you should check fasteners and seals annually, especially after winter. Clear debris from gutters and valleys, and inspect for snow guard damage. We offer inspection and repair services to keep your roof performing for decades.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Buffalo

All your work handled by qualified professionals in Buffalo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Buffalo

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Buffalo · Response within 24h · No commitment · ☎ (716) 261-3070

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Buffalo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm