Serving the Buffalo area  ·  (716) 261-3070  ·  Open Mon-Sun 7am-7pm
📞 (716) 261-3070 Free Quote

Metal Roofing in East Aurora, NY (14052) · Local Professionals

Buffalo Metal Roofing · Fast response in East Aurora and the Buffalo area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

East Aurora still has the bones of a village that grew up around the Roycroft Campus and the old five corners, and that shows in the housing stock: Victorian and foursquare homes near Main Street, brick colonials off Oakwood, and mid-century ranches out toward the 400 and 16. The lots are tight in the village core and wider in the subdivisions, and the grade often falls away from the street, which means meltwater from a spring thaw has somewhere to go and usually finds a weak seam first.

We are Buffalo Metal Roofing, based in Buffalo and working East Aurora and 14052 since 2009. Homeowners here call us when a chimney flashing starts staining the ceiling after an ice dam or when a windstorm off the escarpment peels back a panel on a barn out on Blakeley Road. We are a Metal Roofing Alliance member and fully insured, and we give free estimates before anyone touches a ladder.

Metal Roofing in East Aurora (14052)

East Aurora sits at the foot of the Onondaga escarpment, and that changes how water moves across a roof. Village homes on streets like Elmwood and Prospect often have steep Victorian pitches with dormers and chimneys that interrupt the plane, and those are the first places we see leaks after a thaw. The older housing stock near the Roycroft Campus has narrow side yards, so staging materials and getting a crew safely to a chimney or skylight takes planning. Out in the horse country toward Center Road and the Southtowns, we work on farmhouses and outbuildings where snow load and ice damming at the eaves are the real test. Lake-effect bands off Lake Erie drop heavy, wet snow on this side of the hill, and freeze-thaw cycles in March work every fastener and seam. We see it in the field: failed screws, separated standing seams, and flashing gaps that only show up when the meltwater runs.

Our team has served East Aurora and the Buffalo area since 2009, and we know which local building departments want what before we pull a permit.

Our services in East Aurora

How a Job Works in East Aurora

Step 1: you call (716) 261-3070 and we set up a free on-site assessment. We walk the roof, check the flashing at chimneys and dormers, look at the attic side if you can give us access, and give you a written estimate with the scope spelled out. No pressure and no surprises.

Step 2: once you approve, we pull the permit and schedule the work. In the village core we plan around tight driveways and street parking, and we coordinate with any historic district or HOA review before ordering panels. On the larger lots out toward the escarpment we stage materials where the truck can turn around safely.

Step 3: we clean up every day and do a final walkthrough with you. Magnets sweep the lawn and driveway for screws, gutters get checked, and we do not leave until you have walked the job with us and signed off.

Pricing in East Aurora follows the same ballpark as the rest of our Buffalo service area. Metal roof installation starts at $8 per square foot, standing seam at $10, replacement at $9, and a retrofit over existing shingles at $7. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Coating and painting starts at $2.50 per square foot, snow guards at $1,200, and gutters for metal roofs at $9 per linear foot. The real number depends on roof size and pitch, how many penetrations there are, access and staging, the condition of the deck, and how urgent the job is. Call (716) 261-3070 for a free estimate and we will put real numbers on your roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in East Aurora and nearby areas.

My Victorian near the Roycroft Campus has a dormer that leaks every spring thaw. What is usually wrong?
Nine times out of ten it is the flashing where the dormer wall meets the roof plane, plus ice damming at the eave above it. The old step flashing gets brittle, the sealant fails, and meltwater finds the gap. We inspect the dormer, the chimney, and the eave line together because fixing one without the others just moves the leak.
A storm just peeled back panels on my barn off Blakeley Road. How fast can you get out?
Call (716) 261-3070 and we will schedule a free storm and wind damage inspection, usually within a day or two depending on how widespread the storm was. We tarp or secure what we can immediately, document the damage for your insurance claim, and give you a repair estimate. We never promise coverage, but we do give you the paperwork your adjuster needs.
What does a typical metal roof replacement cost on a ranch in the 14052 ZIP code?
Most ranch replacements land in the range of the published starting prices: about $9 per square foot for replacement and $10 for standing seam, so a 1,800 square foot roof is often in the mid-teens to low twenties depending on pitch, penetrations, and whether we tear off or retrofit. We give you a firm written estimate after the free inspection, not a phone guess.
Do I need a permit to re-roof in East Aurora, and who approves it?
Yes, a full replacement or re-roof generally needs a permit, and the threshold, fee, and inspection requirements vary by jurisdiction. We pull the permit as part of the job and coordinate the inspection. For the rules that apply to your address, check the City of East Aurora website at https://www.erie.gov or call the building department before you schedule.
My neighbor says my new standing seam panels cross the property line. What do we do?
Before any installation we locate the property pins and keep the roof and gutter work inside your line. If a panel or gutter overhang is in question, we stop and ask for a survey rather than guess. For HOA or historic district properties, we submit the panel profile and color for approval before ordering so there is no dispute after the fact.
Are you insured for work on my East Aurora home?
Yes. We carry general liability and workers' compensation coverage, and we are happy to provide a certificate of insurance before we start. That protects you if anything goes wrong on the roof or on the ground.
What maintenance should I do on a metal roof in East Aurora before winter?
Clear the gutters and downspouts in late fall, check the snow guards and fasteners on the south-facing slope, and look for any lifted sealant at chimneys and skylights. Ice damming is the big one here, so make sure the attic is properly insulated and vented. A free inspection in October catches most of it before the lake-effect snow arrives.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Buffalo

All your work handled by qualified professionals in Buffalo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Buffalo

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Buffalo · Response within 24h · No commitment · ☎ (716) 261-3070

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Buffalo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm