Serving the Buffalo area  ·  (716) 261-3070  ·  Open Mon-Sun 7am-7pm
📞 (716) 261-3070 Free Quote

Metal Roofing in Kenmore, NY (14217) · Local Professionals

Buffalo Metal Roofing · Fast response in Kenmore and the Buffalo area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Kenmore is a village of solid 1920s and 1930s capes and ranches, with brick doubles and frame homes packed tight along tree-lined streets off Delaware Avenue and near Kenmore Avenue. The lots are narrow, the driveways are short, and the roofs take a beating from lake-effect snow and freeze-thaw cycles that peel shingles apart faster than homeowners expect.

We are Buffalo Metal Roofing, and since 2009 we have replaced and repaired hundreds of roofs across Kenmore and the 14217 ZIP code. When a homeowner near Kenmore Park or along Military Road calls us, they usually have the same story: the shingles are curling, the ice dams are back, and they want a roof that will outlast the next Snowvember.

Metal Roofing in Kenmore (14217)

Kenmore lots are typically 40 to 50 feet wide, which means tight access for staging materials and equipment. Many homes have mature maples and oaks close to the roofline, so we plan for limb removal and gutter protection before a single panel goes up. The village's housing stock is mostly one-and-a-half-story capes and post-war ranches, and those roof pitches are often steep enough to shed snow but shallow enough that ice dams form at the eaves when attic insulation is thin. We see a lot of worn three-tab shingles that have been patched repeatedly, and once the granules are gone and the mat is exposed, a metal roof over shingles or a full tear-off is the only sensible path. Our crews are fully insured with general liability and workers' compensation, and we handle the permit process with the local building department. For questions about village rules, you can start with the City of Kenmore website at https://www.erie.gov, but always confirm current requirements with the building department directly.

Our experience serving Kenmore and the Buffalo area, since 2009.

Our services in Kenmore

How a Job Works in Kenmore

Step 1: You call (716) 261-3070 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and walk the roof with you to identify failed fasteners, separated seams, flashing gaps, or storm damage. We give you a written scope and a clear price before any work begins.

Step 2: On installation day, our crew arrives early to stage materials on your driveway or in the street where allowed. Tight lots in Kenmore mean we often use a conveyor or a small crane to get panels up without damaging landscaping. If your home is in a historic district or subject to HOA design review, we coordinate the panel profile and color approval before we order materials. We pull the required roofing permit and schedule inspections with the local building department.

Step 3: We clean up every day and do a final walkthrough with you when the job is done. Magnets sweep the yard for screws and metal shavings, gutters are cleared, and we leave your property as clean as we found it. You get a written warranty and a direct line to our team for any follow-up questions.

Pricing in Kenmore depends on roof size, pitch, access, and the condition of the existing roof. For a typical 1,200 to 1,600 square foot cape or ranch, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and metal roof replacement starts around $9 per square foot. If you want to go over existing shingles, retrofit starts around $7 per square foot, but only if the existing layers meet code limits. Corrugated and ribbed panel roofing starts around $5.50 per square foot, and stone-coated steel or metal shingle roofing starts around $9 per square foot. Repair work starts around $450 for leaks and flashing, screw replacement and re-fastening starts around $750, and snow guards start around $1,200. We give free estimates and free inspections, so call (716) 261-3070 to get a real number for your Kenmore home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Kenmore and nearby areas.

My Kenmore cape has ice dams every winter along the eaves. Will a metal roof fix that?
A metal roof helps because it sheds snow faster and resists ice buildup better than shingles, but ice dams are usually a sign of heat loss and poor attic ventilation. We inspect your insulation and ventilation during the estimate and recommend snow guards or ice protection where needed. Many Kenmore homes see a big improvement after a metal roof and some attic air sealing.
A storm just peeled back panels on my roof near Kenmore Avenue. How fast can you get out?
Call (716) 261-3070 and we will schedule a free storm and wind damage inspection as soon as possible, often the same day or next day. We secure the area, document the damage for your insurance claim, and give you a written repair estimate. We never promise coverage, but we do provide the photos and paperwork your adjuster needs.
What does a metal roof cost for a typical 1,400 square foot ranch in 14217?
Most Kenmore ranches in that size range fall between $9,000 and $16,000 for a full metal roof replacement, depending on pitch, access, and whether we tear off the old shingles. Standing seam runs higher, and corrugated panel runs lower. Call (716) 261-3070 for a free estimate with exact numbers for your roof.
Do I need a permit to replace my roof in Kenmore?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Kenmore, and the rules vary by jurisdiction. We handle the permit application and inspections for you. You can check with the local building department for current thresholds and fees, and their website is a good starting point.
My neighbor's tree hangs over my roof line. Can you still install a metal roof?
Yes. We deal with overhanging limbs on Kenmore lots all the time. We will note the tree during the estimate and recommend trimming before installation to prevent scratches and debris. If your HOA or village has rules about property lines and tree trimming, we can help you coordinate with your neighbor before the crew arrives.
Are you insured for work on my Kenmore property?
Yes. Buffalo Metal Roofing is fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before work begins so you have it for your records.
What maintenance does a metal roof need in Kenmore's winters?
Metal roofs are low maintenance, but in Kenmore you should check fasteners and seals every few years, keep gutters clear of maple leaves and ice, and make sure snow guards are secure before the first big lake-effect storm. We offer free inspections and can set up a maintenance plan so small issues do not become leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Buffalo

All your work handled by qualified professionals in Buffalo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Buffalo

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Buffalo · Response within 24h · No commitment · ☎ (716) 261-3070

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Buffalo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm